Sensing head size | M8 |
---|---|
Type | Cylinder type Shielded |
Sensing distance | 2 mm ±10% |
Setting distance | 0 to 1.6 mm |
Differential distance | 15% max. of sensing distance |
Sensing object | Ferrous metal (Sensitivity lowers with non-ferrous metals.) |
Standard sensing object | Iron 8 x 8 x 1 mm |
Response frequency | 1.5 kHz (Average value) |
Power source | DC 2-wire models |
Power supply voltage | 12 to 24 VDC (ripple(p-p) 10% max.) |
Operating voltage range | 12 to 24 VDC (Used as UL-certified Models) 10 to 30 VDC |
Leakage current | 0.8 mA |
Control output (Switching capacity) | 3 to 100 mA |
Indicator | Operation indicator (red), Operation setting indicator (green) |
Operation mode | NO |
Protective circuit | Output short-cut protection, Surge suppressor |
Ambient temperature | Operating: -25 to 70 ℃ Storage: -40 to 85 ℃ (no icing) |
Ambient humidity | Operating: 35 to 95% RH Storage: 35 to 95% RH (no condensation) |
Temperature influence | ±15% max. of sensing distance in temperature range of -25 to +70 ℃ (As the basis for sensing distance of 23 ℃) |
Voltage influence | ±1% max. of sensing distance in rated voltage range ±15%. (As the basis for sensing distance at standard power voltage) |
Insulation resistance | Between charged parts and the case: 50 MΩ min. at 500 VDC |
Dielectric strength | Between charged parts and the case: 1,000 VAC 50/60 Hz for 1 min |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h |
Shock resistance | 500 m/s**2 for 10 times each in X, Y, and Z directions |
Degree of protection | IEC: IP67 |
Connection method | M12 connector models (IEC pin arrangement) |
Weight (Packed state) | approx. 15 g |
Material | Case: Stainless steel (SUS303) Sensing surface: Polybutylene terephthalate (PBT) Clamping nuts: Brass nickel plating Toothed washer: Iron zinc plating |
Accessories | Instruction manual |
Hãy là người đầu tiên nhận xét “OMRON E2E-X2D1-M1G”